BharatAQI • Sensor Module Configuration & Provisioning

📍 Location & Node Identity

Configure the physical geographical coordinates and station identification metadata for this AQI node.

Station / Device ID Unique alphanumeric hardware identifier.

Station Display Name

Placement Environment

Area / Sector Name

City

State / Region

Country

Elevation / Altitude (meters above sea level)

Latitude (Decimal Degrees)

Longitude (Decimal Degrees)

🕒 Date, Time, Hardware RTC & Regulatory Standard

Configure internal Real-Time Clock (DS3231), NTP synchronization, and official AQI breakpoints.

Local Module Clock: --:--:--

Last Hardware RTC Sync: Not synced yet

Timezone

Air Quality Regulatory Standard

Enable Network Time Protocol (NTP)

Automatically queries atomic internet time on Wi-Fi connection.

Primary NTP Server Address

NTP Re-synchronization Interval (seconds)

Optical Sensor Calibration Multiplier (K-Factor)

🌐 Data Forwarding & Web Hosting Server Settings

Configure where this sensor module sends telemetry. Supports all standard IoT protocols simultaneously.

REST API

HTTP / HTTPS Webhook Telemetry Forwarder

Web Hosting Address / Endpoint URL Destination server where sensor POSTs real-time JSON packets.

HTTP Method

Push Interval (seconds)

Custom Authorization Header / API Key (Optional)

Offline Flash/MicroSD Buffering

Automatically stores readings to onboard MicroSD card if network drops and retries upon reconnection.

MQTT / MQTTS

MQTT Industrial Publish/Subscribe Broker

MQTT Broker Hostname or IP

Broker Port 1883 for TCP Plain, 8883 for TLS/SSL Secure.

Client ID

Quality of Service (QoS)

Telemetry Topic (Publish)

Control Topic (Subscribe Commands)

MQTT Username (Optional)

MQTT Password (Optional)

Enable MQTTS (TLS Encryption)

WebSocket

WebSocket Low-Latency Duplex Stream

WebSocket Server Endpoint (ws:// or wss://)

CoAP & Raw Socket

CoAP (RFC 7252) & Lightweight Socket Forwarding

CoAP Server URI

Raw UDP/TCP Streaming Target

📶 Wi-Fi Network Scanner & Connection

Scan for in-range wireless access points, select your network, and configure IP addressing.

Detected Wireless Networks Click any network below to automatically set the SSID:

Click "Scan Available Wi-Fi" above to detect access points in range...

Wi-Fi Network Name (SSID)

Wi-Fi Password / Pre-Shared Key

IP Address Assignment

📡 Bluetooth Low Energy (BLE) Environmental Sensing

Configure onboard BLE advertising, GATT environmental services (0x181A), and search for nearby BLE nodes.

Enable Onboard BLE Radio

Enables local wireless provisioning and Bluetooth environmental beacons.

BLE Advertised Device Name

BLE Profile / Operating Mode

Advertising Interval (ms)

Radio Transmission Power (TX)

🔐 Gateway Security & Password Management

Update administrative credentials and review active session status.

Current Password

New Password

Confirm New Password

Sensor Admin Authentication